bandsaw

  • The success of a business depends on a great variety of factors. When we’re talking about cutting wood, our expertise is strictly related to working with bandsaws. 

  • Log cutters are of different types, depending on the material from which they are constructed and the speed of operation.

  • How do we choose the right thickness of bandsaw blades?

    The correct choice of the thickness of the bandsaw is of major importance for the sawing process.

    The right thickness can prevent both the cracking of the bandsaw and the phenomenon of cutting into waves.

    To avoid these situations, we recommend applying the following formula:

    Gp[mm]=Dv[mm]/1000

    Gp= the approximate thickness of the cloth

    Dv= flywheel diameter in millimeters

    How do we apply the formula?

    By dividing the diameter of the flywheel by 1000 we will obtain an indicative value of the thickness of the saw blade. As a rule, we will choose from the range of standard thicknesses of the steel strip, the value closest to the result of the formula, preferably the upper one.

    For example, if we have a machine with a flywheel diameter of 1600 mm, the approximate thickness of the bandsaw would be 1600/1000, i.e. 1.6 mm. Since this is not a standard thickness, as a rule, you will opt for a bandsaw with the upper thickness of 1.65 mm.

    Also, in the case of a machine with a flywheel diameter of 1000 mm, the recommended thickness of the bandsaw will be 1 mm, which is among the standard thickness values, and in this case, it can be chosen as the material thickness.

    Of course, neighboring values ​​both lower and higher than the guideline value obtained from the calculation can be chosen, depending on the specific conditions, such as: the essence of the cut wood, the length of the bandsaw, the special requirements for cutting efficiency (small thickness of cuts), etc.

    Why is the thickness of the bandsaw blades important?

    1. If the thickness of the blade is less than that calculated by applying the formula Dv/1000, the width of the cut is smaller, but instead the stability of the blade may be affected and thus, the phenomenon called cutting in waves may occur.
    2. If the thickness of the blade is too large in relation to the diameter of the flywheel, the stability of the blade is better, it is possible to work with high cutting speeds, but instead there is the risk of cracking of the blades due to the strong fatigue stress of the material.

    That's why it's good to analyze all the options every time and choose the one that best meets the cutting conditions and efficiency requirements.

    When do you want to test our bandsaw blades? Phone: +40-261-711511, e-mail: Ten adres pocztowy jest chroniony przed spamowaniem. Aby go zobaczyć, konieczne jest włączenie w przeglądarce obsługi JavaScript.
    Did you like this article? Subscribe to the newsletter and you will receive the latest materials by e-mail once a month. 
    You can also find us on Facebook!

     

     

  • Tensioning is one of the most important operations that ensure straight and long lasting cutting with the saw blades. Find out more about the correct execution of this operation here.

  • Napinanie jest jedną z najważniejszych operacji, które zapewniają proste i długotrwałe cięcie za pomocą pił. 

  •  

    If you work in the wood processing or wooden construction industry, you know how important it is to have reliable and high-quality blades. Whether you're cutting logs, timber, plywood, or other wood materials, you need blades that can withstand the task and deliver precision cuts every time.
    This is where Metamob comes in.
    As the leading manufacturer of bandsaw blades and log saw blades in Romania, Metamob offers a wide range of products designed to meet the unique needs of wood processing companies. From furniture makers and carpenters to cabinet manufacturers and window makers, our products are trusted by professionals across the industry. Depending on your needs, below you will find our diverse range of blades for cutting logs or wood processing:
     
     
    So, what are the pain points faced by wood processing companies when it comes to log cutting blades? And how can Metamob help overcome these challenges?
    Slow cutting speed
    One of the biggest challenges for wood processing and wooden construction companies is achieving a higher cutting speed without sacrificing blade quality. When it takes longer to complete a job, it can affect both productivity and profitability. Whether you're working on a large-scale project or a single order, time is always of the essence.
    Solution: High-Quality Saw Blades
    At Metamob, we recognize that both speed and quality are critical factors when it comes to blades. That's why we offer products made from the highest quality materials, designed to deliver optimal performance for specific cutting applications. Our blades come in various sizes, tooth configurations, and materials, depending on your unique requirements. So, whether you're looking for a blade for log cutting or plywood cutting, we can assist.
    Limited customization options
    Another challenge faced by wood processing and wooden construction companies is the limited number of customization options available for saw blades. Every job is different, and each project may require unique blade specifications, depending on requirements.
    Solution: Customization Services
    At Metamob, we understand that our customers have diverse needs when it comes to saw blades. That's why we offer customization services to meet your unique requirements. We work closely with our customers to understand their specific needs and design custom blades that deliver optimal performance. Whether you need a blade with a certain tooth configuration or made from a specific material, we can deliver blades tailored to your specifications.
    Lack of technical support
    Finally, many wood processing and wooden construction companies face a lack of technical support when it comes to log cutting blades. With so many different blades available, it can be challenging to choose the right one for the job. Plus, if something goes wrong during a project, it can be hard to get the help you need to fix the problem.
    Solution: Technical Support and Guidance
    At Metamob, we're committed to providing exceptional support to our customers at every stage of a project. We offer technical support and guidance to help our customers select the right saw blades for their specific cutting tasks. Plus, if something goes wrong during a project, our after-sales maintenance services are available to diagnose and efficiently solve any issues.
    If you're looking for high-quality log cutting blades that can help you overcome the challenges of wood processing, Metamob is here to help. With our broad range of products, customization services, and technical support and guidance, we're committed to providing exceptional value to our customers.
    Contact the sales team if you're interested in our products: Ten adres pocztowy jest chroniony przed spamowaniem. Aby go zobaczyć, konieczne jest włączenie w przeglądarce obsługi JavaScript., T: 0261 711 511.
     

  • Naprężanie - jedna z podstawowych operacji dla dobrego funkcjonowania ostrzy.

  • Spannen und Richten -sind  grundlegende Operationen für eine gute Funktion der Bandsägeblätter.

  • Tensioning - one of the fundamental operations for a good functioning of the blades

  • Winter cutting is about optimally preparing the logs before cutting and choosing the right tooth shape. Here are some tricks and tips for you.
Albanian Bosnian Bulgarian Chinese simplified Croatian Czech Finnish French Greek Japanese Latvian Portuguese Russian Serbian Slovenian Spanish Swedish Turkish Ukrainian English Romanian Hungarian German Polish